instrumentation

COMPRESSION TESTING MACHINE

01.

Compression Testing machines are universal testing machines specially configured to evaluate static compressive strength characteristics of materials, products, and components. … Each compression tester is configured to your test requirements by our application engineers with the correct controller, grips, and accessories.

VERNIER CALIPER DIGITAL

02.

The Digital Caliper is a precision instrument that can be used to measure internal and external distances extremely accurately.

Digital calipers are easier to use as the measurement is clearly displayed and also, by pressing the inch/mm button the distance can be read as metric or imperial.

ANALYTICAL BALANCE

03.

Analytical Balance are highly sensitive lab instruments designed to accurately measure mass. Analytical balances have a draft shield or weighing chamber to prevent the very small samples from being affected by air currents. They’re meant to detect very fine increments, so the slightest vibrations or breeze can impact the results. As such, analytical balances should be used in a dedicated room with as few disturbances as possible. Analytical balances need to be monitored carefully and calibrated frequently.

AGGREGATE IMPACT TESTER

04.

Aggregate Impact Tester is used for determining the aggregate impact value and has been designed in accordance with IS:2386 (Part 4 ), IS:9377. The sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 ± 5 mm. The hammer is provided with a locking arrangement.

MARSHALL APPARATUS

05.

Most frequently used test by highway departments, contractors, engineers, testing laboratories and governmental agencies is the stability test using Marshall Apparatus. The test is intended for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface. For use with hot mixture containing asphalt or tar and aggregate up to 25.4 mm maximum size.

SIEVES G.I FRAME

06.

Sieves is a common laboratory requirement. Sieves are used for sieving of chemical powders, medical powders, aggregate, sand soil and cement etc. These sieves are manufactured as per various standards like ISS, BSS, ASTM, DIN etc. Sieves are commonly used for gradation and particle size determination. these are mainly made of brass frame and g. I. Frame of dia. 200mm, 300mm & 450mm.

INSTRUMENTATION DIVISION
GENERAL ELECTRIC OVEN THERMOSTATICALLY CONTROL TEMPERATURE RANGE 2500C, SENSTIVITY 10C. WITH STAINLESS STEEL INTERNAL SIZE in 30 x 30 x 30 CM. ELECTRONIC DIGITAL TOP BALANCE CAPacity 20 KG.OR 10KG RESOLUTION 1g, BATTARY BACK UP ARRANGEMENT WITH BATTARIES. PHYSICAL BALANCE 250 gm 1 mg WITH WEIGHT BOX. WATER BATH RECTANGULAR(SINGAL WALL) THERMOSTATIC CONTROL SIZE INSIDE CHAMBER STAINLESS STEEL 300 x 250 x 100MM, (6 HOLES, 75 MM DIA.) THERMOMETER RANGE 0-3600C. OR 2500C ZEAL ENGLAND LAB HOT PLATE ROUND SURFACE DIA 20 CM, WITH 3 HEATS WITCH. G.I. TRAY SIZE 300 x 450 MM WITH HANDLE G.I. TRAY SIZE 250 x 450 MM WITH HANDLE SPATULAS. FIRST AID BOX DIGITAL STOP WATCH
SOIL TESTING SIEVES G.I. FRAME COLOR PAINTED 45CM DIA AS PER IS : 460 SIZE 125, 100, 90, 80, 75,63, 53, 50, 45, 40, 37.5, 31.5, 26.5, 22.4, 20, 19, 16, 13.2, 12.5, 11.2, 9.5, 6.7, 4.75MM SIEVES BRASS/SS FRAME 20CM DIA AS PER IS : 460, SIZE 2.36, 2.00, 1.18 MM,600, 425, 300, 150, 90 AND 75 MICRON LIQIID LIMIT KIT WITH COUNTER HAND OPERATED AS PER IS: 2720(Part 5) PLASTIC LIMIT KIT AS PER IS:2720 (PART V)1985. COMPACTION TEST APPARATUS COMPLETE WITH MOULD 100MM AND 2.6 KG RAMMER ZINK PLATED AS PER IS: 10074 (PARTVII) RAMMER 4.89 KG COMPLETE AS PER IS:9198 SAND POURING CYLINDER COMPLETE WITH CALIBRATING CONTAINER & TRAY CENTER HOLE AS PER IS:2720 (PART 28) SPEEDY MOISTURE METER COMPLETE WITH CHEMICAL AS PER IS : 2720 (PART2) IS: 12175 ELECTRONIC MOISTURE METER POST HOLE ANGER COMPLETE150 MM DIA. PYCNOMETER AS PER IS : 2386(PART 3) CORE CUTTER WITH DOLLEY & RAMMER COMPLETE SET AS PER IS: 2720 (PART 29) LABORATORY CBR TEST APPARATUS MOTORISES AS PER IS: 9669, IS:2720 (PART XVI) BACKER DIAL GAUGE 0.01 x 25mm. SLIT MEASURING CYLINDER PLASTIC SOIL SAMPLER CONTAINER ALLUMINIUM/STAINLESS STEEL
AGGREGATE RIFFLE SAMPLER DIVIDER 14 CHUTES AS PER IS : 1607-1977 FLAKINESS INDEX GAUGE AS PER IS : 2386 (PART 1) LENGTH GAUGE AS PER IS : 2386 (PART 1) CYLINDERICAL METAL MEASURES 3, 15, 30 LTRS AS PER IS:2386 (PART-3) AGGREGATE IMPACT TESTER WITH BLOW COUNTER AS PER IS : 2386 (PART 4) PULVERIZER WITH MOTOR JAW CRUSHER WITH ELECTRIC MOTOR FEED SIZE 50MM PRODUCT DISCHARGE 5MM TO 15MM CAP. 100TO 200KG 3 PHASE, 3 HP MOTOR LOS ANGLES ABRATION TESTING MACHINE AS PER IS : 10070
FOR CEMENT & CONCRETE STANDARD SAND GRADE I, II, III 25KG BAG IS 650/1966 VICAT APPARATUS WITH DASHPOT,WITH ISI MARK IS:5513 SLUMP TESTING APPARATUS COMPLETE AS PER IS : 7320 LECHALIER MOULD WITH ISI MARK IS: 5514 COMPRESSION TESTING MACHINE 1000 KN HAND OPERATED AS PER IS:14858(2000) WITH CALIBRATION CERTIFICATE (INSTALLATION FREE) COMPRESSION TESTING MACHINE CAP. 2000KN WITH TWO GAUGE 2000KN & 500 KN AS PER IS : 14858 (2000) HAND CUM ELECTRICALLY OPERATED WITH CALIBRATION CERT.(INSTALLATION FREE) DIGITAL COMPRESSION TESTING MACHINE 4 PILLIAR TYPE CAP. 1000KN DIGITAL COMPRESSION TESTING MACHINE 4 PILLIAR TYPE CAP. 2000KN CUBE MOULD COST IRON 15 CM CUBE AS PER IS : 10086 CUBE MOULD STEEL 7.06 CM CUBE AS PER IS : 10080 LABORATORY CONCRETE MIXER ELECTRIC OPERATED DRUM 30LTRS CAP. COMPACTION FACTOR APPARATUS AS PER IS : 5515 CONCRETE PENETROMETER SPRING TYPE AS PER IS: 8142 (1976) BULK DENSITY MEASURES 10 & 20 LTRS AS PER IS:1199, IS:10079 BULK DENSITY MEASURES 3 LTRS FLOW TABLE FOR CEMENT MORTOR HAND OPERATED AS PER IS:1199 VIBRATION TABLE 50 X 50CM WITH MOTOR EN 12350-6,7 MORTOR MIXER 4.75 LTRS CAP. COMPLETE AS PER IS: 10890 CONCRETE TEST HAMMER AS PER IS:13311-1992 (PART-2) WITH NCCBM TEST CERTIFICATE AIMIL CUBE MOULD PLASTIC 150MM CUBE
FOR BITUMEN/TAR TESTING INSTRUMENTS HAND OPERATED CENTRIFUGE EXTRACTOR, (EN 12697-1,ASTM D 2172) STANDARD PENETROMETER COMPLETE AS PER IS : 1203 SOFTENING POINT APPARATUS AS PER IS : 1205 (RING & BALL APPARATUS) ELECTRICALLY HEATED WITH THERMOMETER IP60C & IP61C. DUCTILITY TESTING MACHINE ELECTRICALLY OPERATED AS PER IS : 1208 WITH THERMOMETER IP 38C. MARSHALL APPARATUS WITH DIAL GAUGE & PROVING RING(ASTMD1559,EN-12697-34 TAR VISCOMETER WITH THERMOMETER AS PER IS:1206 STRAIGHT EDGE CAMBER BOARD ALLUMINIUM CAMBER BOARD ALLUMINIUM ADJUSTABLE DIGITAL THERMOMETER WITH STEM -50 TO 300 DEG C
SURVEY INSTRUMENTS TRANSIT VERNIER THEODOLITE EXPORT QUALITY ACCURACY 10" MODEL AK-14, GERMAN PATTERN HAVING OPTICAL PLUMMET ARRANGEMENT, DETAILED SPECIFICATION AS PER LEAFLET SUPPLIED IN WOODEN BOX AND ALL ALUMINIUM TELESCOPIC STAND IMPORTED AUTOLEVEL 2024 MAGNIFICATION 24 X ACCURACY IN 1 KM DOUBLE RUN ± 2MM SUPPLIED WITH ALLUMINIUM STAND LEICA GERMANY MAKE AUTOLEVEL 2024 MAGNIFICATION 24 X ACCURACY IN 1 KM DOUBLE RUN ± 2MM SUPPLIED WITH ALLUMINIUM STAND ALLUMINIUM LEVELLING STAFF 4 METER SOKKIA TYPE PRISMATIC COMPASS: MADE OF GUN METAL SUPPLIED IN A LEATHER SLING CASE WITH ALLUMINIUM TRIPOD STAND HAVING BALL AND STOCKET JOINT SIZE 100MM DIA ELECTRIC ROAD MEASURER VERNIER CALIPER DIGITAL 0-150MM SREW GAUGE MICROMETER 0-25MM DEPTH GAUGE